Repariere deine Sachen Community Store

Canon EOS Rebel T5 Back Cover Removal

Einleitung

If you are going to replace any of the major components of your camera, you will need to first remove the back cover. This guide will teach you how to open up your camera.

Was du brauchst

  1. Canon EOS Rebel T5 Back Cover Removal, Battery: Schritt 1, Bild 1 von 1

    • Lay the camera on its back so that the card/battery door is facing you.

    • Using your fingernail, slide the tab on the battery door up to release the battery door latch.

    Bearbeiten

  2. Canon EOS Rebel T5 Back Cover Removal: Schritt 2, Bild 1 von 1

    • Lift the now free card/battery door to reveal the battery compartment.

    • Push the gray lever to the right side so that the battery can be removed and replaced with a new one.

    Bearbeiten

  3. Canon EOS Rebel T5 Back Cover Removal, Back Cover: Schritt 3, Bild 1 von 1

    • Turn the camera so that the back is facing to your right.

    • Remove the 5mm JIS #000 screw above the rubber USB port cover.

    Bearbeiten

  5. Canon EOS Rebel T5 Back Cover Removal: Schritt 4, Bild 1 von 1

    • Remove the rubber piece.

    • Unscrew the two screws under the rubber cover to completely remove the rubber cover piece.

    • It is held in place by a notched tether, but can be easily manipulated to slide out.

    Bearbeiten

  6. Canon EOS Rebel T5 Back Cover Removal: Schritt 5, Bild 1 von 1

    • Turn your camera so that the bottom is facing you.

    • Remove the 5mm JIS #000 screws.

    Bearbeiten

  7. Canon EOS Rebel T5 Back Cover Removal: Schritt 6, Bild 1 von 1

    • Now turn the camera so that the front is facing towards your right.

    • Remove the two remaining 5mm JIS #000 screws.

    Bearbeiten

  8. Canon EOS Rebel T5 Back Cover Removal: Schritt 7, Bild 1 von 3 Canon EOS Rebel T5 Back Cover Removal: Schritt 7, Bild 2 von 3 Canon EOS Rebel T5 Back Cover Removal: Schritt 7, Bild 3 von 3

    • Now that all of the exterior screws have been removed, grip the camera firmly on both sides.

    • Gently pry the back panel from the main body of the camera.

    • There are two ribbon cables that need to be removed in order for the back panel to come free from the camera body, as indicated.

    • This back panel contains various control components of the camera as well as the LCD screen.

    Bearbeiten
Abschluss

To reassemble your device, follow these instructions in reverse order.

5 weitere Personen haben diese Anleitung absolviert.

Autor:in

mit 5 anderen Mitwirkenden

Johnyp

Mitglied seit: 08/26/15

266 Reputation

1 Anleitung geschrieben

Auszeichnungen: 12

+ 9 weitere Auszeichnungen

Team

USF Tampa, Team 16-4, Wollert Fall 2015 Mitglied von USF Tampa, Team 16-4, Wollert Fall 2015

USFT-WOLLERT-F15S16G4

4 Mitglieder

16 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 3

Letzte 7 Tage: 22

Letzte 30 Tage: 24

Insgesamt: 3,649