Was du brauchst
-
-
The first step for a lens error is to gently clean the leans with a clean cloth. If this does not work, then you proceed with the following steps.
-
Apply gentle pressure to the lens cover and move lens in a circular motion until you hear a "click".
-
-
-
Hold down the menu button for at least 10 seconds and select the "Factory Reset" option to reset your lens.
" Lens Error. Will shut down automatically." Cannot access menu. Shutter is half open under the lens cover.
-
-
-
-
Remove the battery from your camera and replace it once it is fully charged or buy a new battery if your current one is over a year old. See Battery Removal for more details.
-
Once the battery is out, remove the memory card from camera as well. See Memory Card Replacement for more details.
-
Turning the camera on without a memory card will reset the camera. If the camera has been reset and displays a memory card error message, then the memory card can be reinserted and the camera turned on once again.
-
-
-
Insert the A/V cable then plug the cable into a power supply or computer. Please see Connecting Camera to Computer for further instructions.
-
Turn the camera on by pushing the ON/OFF button.
-
-
-
While turning the camera on by pushing the ON/OFF button, press and hold the MENU or FUNC. SET button.
-
Team
Clemson, Team 1-3, Benson Fall 2014 Mitglied von Clemson, Team 1-3, Benson Fall 2014
CLEM-BENSON-F14S1G3
3 Mitglieder
17 Anleitungen geschrieben
2 Kommentare
My lens is stuck out and won't go back in it says lens error and that it will shut off automatically what do I do?
I have done all of the above recommendations and my camera still has a lens error and lens won’t open… :-(
