Open the battery door by sliding the tab on the battery door while pushing the battery door away from the camera. Remove batteries.
  • Open the battery door by sliding the tab on the battery door while pushing the battery door away from the camera.

  • Remove batteries.

Kommentar hinzufügen

Remove the three indicated .2mm screws using a Philips #00 screwdriver. Gently pull off side-panel to remove it.
  • Remove the three indicated .2mm screws using a Philips #00 screwdriver.

  • Gently pull off side-panel to remove it.

Kommentar hinzufügen

Remove the two indicated .2mm screws using a Philips #00 screwdriver.
  • Remove the two indicated .2mm screws using a Philips #00 screwdriver.

Kommentar hinzufügen

Remove the indicated .2mm screw using a Philips #00 screwdriver. Remove the three .2mm screws located on the internal side of the top panel within the battery chamber using a Philips #00 screwdriver.
  • Remove the indicated .2mm screw using a Philips #00 screwdriver.

  • Remove the three .2mm screws located on the internal side of the top panel within the battery chamber using a Philips #00 screwdriver.

Kommentar hinzufügen

Open 'DIGITAL A/V OUT' door on camera. Remove the two indicated .2mm screws using a Philips #00 screwdriver.
  • Open 'DIGITAL A/V OUT' door on camera.

  • Remove the two indicated .2mm screws using a Philips #00 screwdriver.

Kommentar hinzufügen

Grip the sides of the top panel and gently pull to separate the top panel from the camera body.
  • Grip the sides of the top panel and gently pull to separate the top panel from the camera body.

  • The top panel will not completely detach.

Kommentar hinzufügen

Gently pull the front and back panels apart, and use a Phillips #00 screwdriver to remove the screw connecting the panels. Gripping the top and bottom, gently pull the front panel away from the camera body to remove it.
  • Gently pull the front and back panels apart, and use a Phillips #00 screwdriver to remove the screw connecting the panels.

  • Gripping the top and bottom, gently pull the front panel away from the camera body to remove it.

Kommentar hinzufügen

insert wisdom here insert wisdom here
  • insert wisdom here

Kommentar hinzufügen

Remove the 2 mm screws from the metal plate.
  • Remove the 2 mm screws from the metal plate.

Kommentar hinzufügen

Pull away the metal plate, exposing the underbelly of the mode dial.
  • Pull away the metal plate, exposing the underbelly of the mode dial.

  • Be careful not to pull too hard. Metal plate should remain attached.

Kommentar hinzufügen

Remove the 2mm screw using the #00 Phillips screwdriver. The mode dial should fall out.
  • Remove the 2mm screw using the #00 Phillips screwdriver.

  • The mode dial should fall out.

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein weiterer Nutzer hat diese Anleitung absolviert.

Alicia Burns

Mitglied seit 13.10.2014

552 Reputation

5 Anleitungen geschrieben

Team

Clemson, Team 2-5, Benson Fall 2014 Mitglied von Clemson, Team 2-5, Benson Fall 2014

CLEM-BENSON-F14S2G5

4 Mitglieder

9 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 1

Letzte 7 Tage: 2

Letzte 30 Tage: 4

Insgesamt: 206