Ersatzteile

Kein Ersatzteil erforderlich.

Remove the two screws from the side panel closest to the camera lens.
  • Remove the two screws from the side panel closest to the camera lens.

  • Note: These screws are 2.9 mm long.

Kommentar hinzufügen

Remove the two screws from the camera bottom panel.
  • Remove the two screws from the camera bottom panel.

  • Note: These screws are 2.9 mm long.

Kommentar hinzufügen

  • Remove the 2 screws from the side panel farthest from the lens.

  • Note: These screws are 2.9 mm long.

Kommentar hinzufügen

  • Pull the back panel away from the camera body, starting at the end with the function buttons.

Kommentar hinzufügen

  • Remove the small cover panel and attached wrist strap mount.

Kommentar hinzufügen

  • Remove the front cover by gently pulling it away from the camera body.

Kommentar hinzufügen

  • Place the front cover, back cover, and wrist strap mount in a safe place until you are ready for reassembly.

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Phillip Phung

Mitglied seit 19.01.2012

486 Reputation

9 Anleitungen geschrieben

Team

Cal Poly, Team 8-18, Maness Winter 2012 Mitglied von Cal Poly, Team 8-18, Maness Winter 2012

CPSU-MANESS-W12S8G18

4 Mitglieder

10 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 3

Insgesamt: 1,019