Ersatzteile

Kein Ersatzteil erforderlich.

  1. Remove the two screws from the side panel closest to the camera lens.
    • Remove the two screws from the side panel closest to the camera lens.

    • Note: These screws are 2.9 mm long.

  2. Remove the two screws from the camera bottom panel.
    • Remove the two screws from the camera bottom panel.

    • Note: These screws are 2.9 mm long.

    • Remove the 2 screws from the side panel farthest from the lens.

    • Note: These screws are 2.9 mm long.

    • Pull the back panel away from the camera body, starting at the end with the function buttons.

    • Remove the small cover panel and attached wrist strap mount.

    • Remove the front cover by gently pulling it away from the camera body.

    • Place the front cover, back cover, and wrist strap mount in a safe place until you are ready for reassembly.

    • Using the spudger, take off the shutter button by prying the small tab on the front side of the camera.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Phillip Phung

Mitglied seit 19.01.2012

486 Reputation

9 Anleitungen geschrieben

Team

Cal Poly, Team 8-18, Maness Winter 2012 Mitglied von Cal Poly, Team 8-18, Maness Winter 2012

CPSU-MANESS-W12S8G18

4 Mitglieder

10 Anleitungen geschrieben

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 3

Insgesamt: 895