Einleitung
This guide will provide you with step-by-step instructions on how to replace a faulty LCD screen for a Canon PowerShot SD400. The LCD, or liquid crystal display, is a flat monitor that displays images. The LCD may need to be replaced if it has cracks, discolored pixels, spots, blobs, flickering, or if there's no image signal. Before you begin, ensure that the camera is powered off.
Was du brauchst
-
-
Locate the 6 screws that you must remove to open the camera housing.
-
There are 2 screws on the bottom and 2 screws on each side
-
-
-
Using the screwdriver, carefully remove the exterior screws and set them aside to avoid misplacing them.
-
-
-
Locate the interior screw to the top right of the screen.
-
Remove the screw using the screwdriver.
-
-
-
Insert the flat-head screwdriver under the LCD screen into the two clips.
-
Lift the LCD screen.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
2 weitere Nutzer:innen haben diese Anleitung absolviert.
Team
James Madison, Team 1-1, Allen Fall 2011 Mitglied von James Madison, Team 1-1, Allen Fall 2011
JMU-ALLEN-F11S1G1
4 Mitglieder
4 Anleitungen geschrieben
