Einleitung

This will show you how to replace the LCD screen on the back of your camera.

Ersatzteile

Kein Ersatzteil erforderlich.

  1. Begin by making sure that the camera is turned off and that the battery is removed as to avoid any shock injuries.
    • Begin by making sure that the camera is turned off and that the battery is removed as to avoid any shock injuries.

    Kommentar hinzufügen

  2. With the battery removed, you can begin removing the outermost screws from the camera to allow for case replacement, while keeping track of where each screw comes from. There are (5) screws in total. This will require a Philips head # 00 screwdriver.
    • With the battery removed, you can begin removing the outermost screws from the camera to allow for case replacement, while keeping track of where each screw comes from. There are (5) screws in total. This will require a Philips head # 00 screwdriver.

    • There are (2) screws located on the left side of the camera. These screw locations are depicted with the red circle markings in the second photo of this step. These screws are 2 mm long.

    Kommentar hinzufügen

    • Remove the front panel of the camera case to expose the top left copper strip. Gently pull said strip upward and disconnect it from the camera.

    Kommentar hinzufügen

  3. Frohes Fest, frohes Tüfteln
    Pack's ein, pack's aus, pack's an: Erhalte 12 € Rabatt auf deinen Einkauf ab 50 € mit dem Code FIXMAS12
    Frohes Fest, frohes Tüfteln
    Pack's ein, pack's aus, pack's an: Erhalte 12 € Rabatt auf deinen Einkauf ab 50 € mit dem Code FIXMAS12
    • Then, remove the screw on the far left-hand side of the camera as indicated in the photo.

    Kommentar hinzufügen

    • Now that you have removed all of the screws, carefully pull the case apart at the seam. The case will detach from the camera in two pieces.

    Kommentar hinzufügen

    • Then, remove the indicated "L" shaped bracket from around the top and right sides of the LCD screen.

    Kommentar hinzufügen

    • Insert the flat side of your spudger tool carefully into the top of the LCD screen and lift the screen free.

    Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Arlene Ale

Mitglied seit 13.03.2014

455 Reputation

4 Anleitungen geschrieben

Team

New Mexico State, Team 1-5, Easley Spring 2014 Mitglied von New Mexico State, Team 1-5, Easley Spring 2014

NMSU-EASLEY-S14S1G5

2 Mitglieder

4 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 1

Insgesamt: 538