Einleitung

Remove the battery of the Canon PowerShot SX50 HS.

  1. Locate the battery compartment on the bottom of the camera.
    • Locate the battery compartment on the bottom of the camera.

    • Push the latch on the outside of the battery door to the right to get to the battery pack inside.

  2. Kostenloser Versand für alle Bestellungen über 100 $ oder mit einem Pro Tech Toolkit!

    Schau dich im Store um
  3. Pull the brown latch on the inside of the battery door towards your palm (to the left). The battery pack should pop out (battery not pictured).
    • Pull the brown latch on the inside of the battery door towards your palm (to the left). The battery pack should pop out (battery not pictured).

    • Now remove the battery pack from the camera with your fingers.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Megan Rund

Mitglied seit: 01.04.2015

430 Reputation

3 Anleitungen geschrieben

Team

Cal Poly, Team 12-7, Lancaster Spring 2015 Mitglied von Cal Poly, Team 12-7, Lancaster Spring 2015

CPSU-LANCASTER-S15S12G7

5 Mitglieder

7 Anleitungen geschrieben

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 3

Letzte 30 Tage: 8

Insgesamt: 1,086