Repariere deine Sachen Community Store

Canon PowerShot SX600 HS Flash Assembly Replacement

Einleitung

By fixing your flash, you can once again take bright, vibrant photographs.

Was du brauchst

  1. Canon PowerShot SX600 HS Flash Assembly Replacement, Battery: Schritt 1, Bild 1 von 1

    • To remove the battery, locate the battery cover on the bottom of the camera.

    • Using your thumb, press down on the cover and slide it outwards.

    Bearbeiten

  2. Canon PowerShot SX600 HS Flash Assembly Replacement: Schritt 2, Bild 1 von 1

    • Depress the orange lever holding the battery in place to unlock it.

    Bearbeiten

  3. Canon PowerShot SX600 HS Flash Assembly Replacement: Schritt 3, Bild 1 von 2 Canon PowerShot SX600 HS Flash Assembly Replacement: Schritt 3, Bild 2 von 2

    • Use your fingers to remove the battery.

    • Be sure to remember the alignment of the nodes for reassembly.

    Bearbeiten

  4. Canon PowerShot SX600 HS Flash Assembly Replacement, Power and Shutter Buttons: Schritt 4, Bild 1 von 1

    • Use a #000 Phillips screwdriver to unscrew the four 4mm screws located on the sides of the camera (2 for each side).

    Bearbeiten

  5. Canon PowerShot SX600 HS Flash Assembly Replacement: Schritt 5, Bild 1 von 1

    • Unscrew the four 2mm located on the bottom of the camera using a Phillips #000 screwdriver.

    Bearbeiten

  6. Canon PowerShot SX600 HS Flash Assembly Replacement: Schritt 6, Bild 1 von 1

    • Use a plastic opening tool to loosen and remove both the front and back plates of the camera, as well as the two side pieces.

    Bearbeiten

  8. Canon PowerShot SX600 HS Flash Assembly Replacement: Schritt 7, Bild 1 von 2 Canon PowerShot SX600 HS Flash Assembly Replacement: Schritt 7, Bild 2 von 2

    • Unscrew the three 2mm screws attaching the piece to the camera frame with a #000 Phillips screwdriver.

    Bearbeiten

  9. Canon PowerShot SX600 HS Flash Assembly Replacement: Schritt 8, Bild 1 von 1

    • Use an opening tool to gently remove the power and shutter button assembly from the frame.

    Bearbeiten

  10. Canon PowerShot SX600 HS Flash Assembly Replacement, Display Screen: Schritt 9, Bild 1 von 2 Canon PowerShot SX600 HS Flash Assembly Replacement, Display Screen: Schritt 9, Bild 2 von 2

    • Unscrew the 2mm screw connections of the main board protector from the camera frame using a #000 Phillips head screwdriver (2 on front, 1 on top)

    Bearbeiten

  11. Canon PowerShot SX600 HS Flash Assembly Replacement: Schritt 10, Bild 1 von 1

    • Use a Phillips #000 screwdriver to unscrew the 4mm screw.

    Bearbeiten

  12. Canon PowerShot SX600 HS Flash Assembly Replacement: Schritt 11, Bild 1 von 1

    • Use a pair of tweezers to remove the no-fuss connector from its holder.

    Bearbeiten

  13. Canon PowerShot SX600 HS Flash Assembly Replacement: Schritt 12, Bild 1 von 1

    • Gently lift the protector from the frame.

    Bearbeiten

  14. Canon PowerShot SX600 HS Flash Assembly Replacement: Schritt 13, Bild 1 von 1

    • Lift the LCD screen ZIF connector tab and remove the ribbon cable.

    • Detach the no-fuss connector.

    • Lift the screen from its holder.

    Bearbeiten

  15. Canon PowerShot SX600 HS Flash Assembly Replacement, Flash Assembly: Schritt 14, Bild 1 von 1

    • Unplug the assembly from the main no-fuss connector.

    Bearbeiten

  16. Canon PowerShot SX600 HS Flash Assembly Replacement: Schritt 15, Bild 1 von 1

    • Unplug the assembly from its flat-top connection.

    Bearbeiten

  17. Canon PowerShot SX600 HS Flash Assembly Replacement: Schritt 16, Bild 1 von 1

    • Use a #000 Phillips screwdriver to remove the three 4mm screws that hold the assembly to the frame.

    Bearbeiten

  18. Canon PowerShot SX600 HS Flash Assembly Replacement: Schritt 17, Bild 1 von 1

    • Gently lift the assembly out of its place.

    Bearbeiten
Abschluss

Fix your Canon's flash in order to take bright, vibrant photographs.

Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.

Autor:in

mit 1 anderen Mitwirkenden

Scott Childress

Mitglied seit: 02/15/17

698 Reputation

3 Anleitungen geschrieben

Auszeichnungen: 9

+ 6 weitere Auszeichnungen

Team

USF Tampa, Team S6-G4, Lacy Spring 2017 Mitglied von USF Tampa, Team S6-G4, Lacy Spring 2017

USFT-LACY-S17S6G4

3 Mitglieder

9 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 1

Letzte 7 Tage: 5

Letzte 30 Tage: 15

Insgesamt: 835