Zum Hauptinhalt wechseln

Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.

Canon Powershot SD880 Front Cover Removal Replacement

Was du brauchst

  1. Canon Powershot SD880 Front Cover Removal Replacement, Back Cover: Schritt 1, Bild 1 von 3 Canon Powershot SD880 Front Cover Removal Replacement, Back Cover: Schritt 1, Bild 2 von 3 Canon Powershot SD880 Front Cover Removal Replacement, Back Cover: Schritt 1, Bild 3 von 3
    • Remove the two 2.4 mm screws on the side of the camera that are next to the LCD screen using a Phillips #00 screwdriver.

    • Remove the two 4.1 mm screws on the other side using a Phillips #00 screwdriver.

    • One screw will be located under the rubber USB flap.

    • Remove the single 2.6 mm screw from the bottom of the camera using a Phillips #00 screwdriver.

    • Slowly pull the back cover off of the camera.

  2. Canon Powershot SD880 Front Cover Removal Replacement, Front Cover Removal: Schritt 2, Bild 1 von 3 Canon Powershot SD880 Front Cover Removal Replacement, Front Cover Removal: Schritt 2, Bild 2 von 3 Canon Powershot SD880 Front Cover Removal Replacement, Front Cover Removal: Schritt 2, Bild 3 von 3
    • Remove the screw (2.59 mm) from the bottom of the camera.

    • Remove the screw (4.08 mm) from the menu button side of the camera.

    • Note: the 2 screws on the other side of the camera were already removed when taking off the back cover.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Robert Manno

Mitglied seit: 01/05/11

432 Reputation

4 Anleitungen geschrieben

Team

Cal Poly, Team 13-3, Forte Winter 2011 Mitglied von Cal Poly, Team 13-3, Forte Winter 2011

CPSU-FORTE-W11S13G3

5 Mitglieder

8 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 2

Insgesamt: 2,788