Einleitung
The lithium battery (CR1220) needs to be replaced when the date and time stamp will not stay set, or the camera is still prompting the user to change the batteries after the AA batteries have been replaced.
Was du brauchst
-
-
Open the door. Release the catch by sliding it towards the side of the camera.
-
Then slide the door towards the front of the camera.
-
-
-
-
Remove AA batteries.
-
Using a fingernail or iFixit opening tools to pry up the battery cradle.
-
Remove CR1220 battery from the cradle.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
4 weitere Nutzer:innen haben diese Anleitung absolviert.
Team
Oregon Institute of Technology, Team S2-G6, Lancaster Spring 2019 Mitglied von Oregon Institute of Technology, Team S2-G6, Lancaster Spring 2019
OIT-LANCASTER-S19S2G6
3 Mitglieder
5 Anleitungen geschrieben
