Flip the keyboard upside down so the bottom is angled towards you.
  • Flip the keyboard upside down so the bottom is angled towards you.

Kommentar hinzufügen

Use a #2 Phillips screwdriver to remove the twenty-seven 12 mm screws from the dark gray bottom panel.
  • Use a #2 Phillips screwdriver to remove the twenty-seven 12 mm screws from the dark gray bottom panel.

Kommentar hinzufügen

Remove the bottom panel by lifting the bottom panel up and outward from yourself.
  • Remove the bottom panel by lifting the bottom panel up and outward from yourself.

Kommentar hinzufügen

Flip the entire keyboard so the keys face up, and be careful not to let the bottom drop. Flip the top half of the keyboard and set onto the bottom half with the internal parts facing up.
  • Flip the entire keyboard so the keys face up, and be careful not to let the bottom drop.

  • Flip the top half of the keyboard and set onto the bottom half with the internal parts facing up.

Kommentar hinzufügen

Plug in the soldering iron and place somewhere safe to avoid burning yourself or causing a fire.
  • Plug in the soldering iron and place somewhere safe to avoid burning yourself or causing a fire.

  • Completely unscrew and remove all four screws in the corners of the speaker.

Kommentar hinzufügen

Pull the speaker out of the keyboard and set on a flat surface to solder safely.
  • Pull the speaker out of the keyboard and set on a flat surface to solder safely.

Kommentar hinzufügen

Be careful when removing the wires and avoid dripping solder on yourself or the keyboard.
  • Be careful when removing the wires and avoid dripping solder on yourself or the keyboard.

  • Touch soldering iron to solder over the end of the wires, and when the solder melts, pull the wires away from the speaker.

  • Remove the speaker and replace with a new one.

Kommentar hinzufügen

Strip the wires if you need more clean metal to solder to the speaker.
  • Strip the wires if you need more clean metal to solder to the speaker.

  • Use the soldering iron to melt the solder over the wire to connect them to the speaker.

Kommentar hinzufügen

Completely screw in the screws back into the original positions on the corner of the speaker.
  • Completely screw in the screws back into the original positions on the corner of the speaker.

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein weiterer Nutzer hat diese Anleitung absolviert.

Jimmy Winne

Mitglied seit 04.10.2012

422 Reputation

6 Anleitungen geschrieben

Team

Cal Poly, Team 9-16, Amido Fall 2012 Mitglied von Cal Poly, Team 9-16, Amido Fall 2012

CPSU-AMIDO-F12S9G16

4 Mitglieder

6 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 2

Letzte 7 Tage: 10

Letzte 30 Tage: 56

Insgesamt: 3,361