Ersatzteile

Kein Ersatzteil erforderlich.

Flip the device over to the back side.
  • Flip the device over to the back side.

Kommentar hinzufügen

Slide the small switch on the back to "MAIN".
  • Slide the small switch on the back to "MAIN".

Kommentar hinzufügen

  • Slide the battery cover downwards.

  • Pull off the battery cover.

Kommentar hinzufügen

  • Pull the black tab to remove the battery.

Kommentar hinzufügen

  • Using the Phillips #00 screwdriver, remove the two screws near the top of the device.

Kommentar hinzufügen

  • Using the Phillips #00 screwdriver, remove the two screws located inside the battery compartment.

Kommentar hinzufügen

  • Partially separate the two halves of the case by inserting the tip of a small flat head screw driver into the space between the halves.

Kommentar hinzufügen

  • Pry the two halves of the case apart with the small flat head screwdriver.

Kommentar hinzufügen

  • Caution: be careful not to pull out the wires connecting the two halves of the outer case. These wires are necessary for the device to be able to function.

  • Lay the two halves of the outer case next to the central components as shown.

Kommentar hinzufügen

  • Using the #00 Phillips screwdriver, remove the screws from the corners of the screen. There are 3 screws total.

Kommentar hinzufügen

  • Lift the tab on the motherboard and pull out the ribbon cable.

  • After the ribbon cable is detached from the motherboard, the touch screen is completely separated from the device.

Kommentar hinzufügen

  • Using the #00 Phillips screwdriver, remove the screws on the back of the front case. There are five total.

Kommentar hinzufügen

  • Pull the ribbon cable out of its port on the back of the keypad.

Kommentar hinzufügen

  • The keypad can now be lifted off the front case.

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ryan Fernandez

Mitglied seit 03.04.2012

47 Reputation

5 Anleitungen geschrieben

Team

Cal Poly, Team 5-4, Forte Spring 2012 Mitglied von Cal Poly, Team 5-4, Forte Spring 2012

CPSU-FORTE-S12S5G4

6 Mitglieder

5 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 414