Ersatzteile

Kein Ersatzteil erforderlich.

Flip the device over to the back side.
  • Flip the device over to the back side.

Kommentar hinzufügen

Slide the small switch on the back to "MAIN".
  • Slide the small switch on the back to "MAIN".

Kommentar hinzufügen

Slide the battery cover downwards.
  • Slide the battery cover downwards.

  • Pull off the battery cover.

Kommentar hinzufügen

Pull the black tab to remove the battery.
  • Pull the black tab to remove the battery.

Kommentar hinzufügen

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
Using the Phillips #00 screwdriver, remove the two screws near the top of the device.
  • Using the Phillips #00 screwdriver, remove the two screws near the top of the device.

Kommentar hinzufügen

Using the Phillips #00 screwdriver, remove the two screws located inside the battery compartment.
  • Using the Phillips #00 screwdriver, remove the two screws located inside the battery compartment.

Kommentar hinzufügen

Partially separate the two halves of the case by inserting the tip of a small flat head screw driver into the space between the halves.
  • Partially separate the two halves of the case by inserting the tip of a small flat head screw driver into the space between the halves.

Kommentar hinzufügen

Pry the two halves of the case apart with the small flat head screwdriver.
  • Pry the two halves of the case apart with the small flat head screwdriver.

Kommentar hinzufügen

Caution: be careful not to pull out the wires connecting the two halves of the outer case. These wires are necessary for the device to be able to function.
  • Caution: be careful not to pull out the wires connecting the two halves of the outer case. These wires are necessary for the device to be able to function.

  • Lay the two halves of the outer case next to the central components as shown.

Kommentar hinzufügen

Using the #00 Phillips screwdriver, remove the screws from the corners of the screen. There are 3 screws total.
  • Using the #00 Phillips screwdriver, remove the screws from the corners of the screen. There are 3 screws total.

Kommentar hinzufügen

Lift the tab on the motherboard and pull out the ribbon cable. After the ribbon cable is detached from the motherboard, the touch screen is completely separated from the device.
  • Lift the tab on the motherboard and pull out the ribbon cable.

  • After the ribbon cable is detached from the motherboard, the touch screen is completely separated from the device.

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ryan Fernandez

Mitglied seit 03.04.2012

47 Reputation

5 Anleitungen geschrieben

Team

Cal Poly, Team 5-4, Forte Spring 2012 Mitglied von Cal Poly, Team 5-4, Forte Spring 2012

CPSU-FORTE-S12S5G4

6 Mitglieder

5 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 1

Insgesamt: 640