Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.
Einleitung
This guide shows how to remove the front case from the rest of the camera. You may have to do this to replace a damaged front cover or to access the inner parts of the camera.
Was du brauchst
-
-
Locate 12 screws. Four on the left, four on the right, and four on the bottom.
-
-
-
-
Using the #00 Phillips screwdriver, remove the four 3.66mm screws from the bottom outer case, and the eight 1.75mm screw from the sides of the case.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Team
Cal Poly, Team 9-45, Regan Spring 2012 Mitglied von Cal Poly, Team 9-45, Regan Spring 2012
CPSU-REGAN-S12S9G45
7 Mitglieder
12 Anleitungen geschrieben
