Zum Hauptinhalt wechseln

Ersatzteile

Keine Ersatzteile angegeben.

  1. Remove all six 7.3 mm screws with a #00 Phillips head screwdriver. Remove all six 7.3 mm screws with a #00 Phillips head screwdriver.
    • Remove all six 7.3 mm screws with a #00 Phillips head screwdriver.

  2. Firmly pull each half apart.
    • Firmly pull each half apart.

  3. Once the clock is apart, carefully pull both halves until the clock is in two separate halves. Once the clock is apart, carefully pull both halves until the clock is in two separate halves.
    • Once the clock is apart, carefully pull both halves until the clock is in two separate halves.

  4. Unscrew the two 2 mm screws with a #00 Phillips Head screwdriver. Unscrew the two 2 mm screws with a #00 Phillips Head screwdriver.
    • Unscrew the two 2 mm screws with a #00 Phillips Head screwdriver.

  5. Pull off the clock motor housing and un-clip the 4 clips on each side. Pull off the clock motor housing and un-clip the 4 clips on each side. Pull off the clock motor housing and un-clip the 4 clips on each side.
    • Pull off the clock motor housing and un-clip the 4 clips on each side.

  6. Repair any lose or misplaced gears or wiring.
    • Repair any lose or misplaced gears or wiring.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein weiterer Nutzer hat diese Anleitung absolviert.

Frank

Mitglied seit: 20.01.2015

121 Reputation

1 Anleitung geschrieben

Team

USF Tampa, Team 19-1, Blackwell Winter 2015 Mitglied von USF Tampa, Team 19-1, Blackwell Winter 2015

USFT-BLACKWELL-W15S19G1

4 Mitglieder

4 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzten 24 Stunden: 0

Letzten 7 Tage: 0

Letzten 30 Tage: 5

Insgesamt: 415