Zum Hauptinhalt wechseln

Cleaning Debris from Flywheel Screen

Was du brauchst

  1. Cleaning Debris from Flywheel Screen, Cleaning Debris from Flywheel Screen: Schritt 1, Bild 1 von 3 Cleaning Debris from Flywheel Screen, Cleaning Debris from Flywheel Screen: Schritt 1, Bild 2 von 3 Cleaning Debris from Flywheel Screen, Cleaning Debris from Flywheel Screen: Schritt 1, Bild 3 von 3
    • Ensure the engine is off and cooled down before starting this guide.

    • Using a 5/16" socket or wrench, remove the three bolts holding the plastic cover on to the engine.

    • Lift away the plastic cover. Note that the starter is attached to the cover and will come off with it.

  2. Cleaning Debris from Flywheel Screen: Schritt 2, Bild 1 von 2 Cleaning Debris from Flywheel Screen: Schritt 2, Bild 2 von 2
    • Using compressed air or a rag, clean debris from the flywheel.

Abschluss

To reassemble your device, follow these instructions in reverse order.

2 weitere Nutzer:innen haben diese Anleitung absolviert.

Ethan Narad

Mitglied seit: 04/19/18

529 Reputation

3 Anleitungen geschrieben

Team

Cal Poly, Team S25-G15, Maness Spring 2018 Mitglied von Cal Poly, Team S25-G15, Maness Spring 2018

CPSU-MANESS-S18S25G15

4 Mitglieder

7 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 11

Insgesamt: 871