Einleitung

Use this guide to clean the function buttons.

Werkzeuge

Ersatzteile

Kein Ersatzteil erforderlich.

  1. Remove wrist strap and battery. Remove wrist strap and battery.
    • Remove wrist strap and battery.

  2. Remove 2 screws from each side of the camera (4 total, 0.102 in). Remove 2 screws from the bottom on the camera (0.138 in). Do not mix the 4 side screws with the 2 bottoms ones; they are different sizes.
    • Remove 2 screws from each side of the camera (4 total, 0.102 in).

    • Remove 2 screws from the bottom on the camera (0.138 in).

    • Do not mix the 4 side screws with the 2 bottoms ones; they are different sizes.

  3. Kostenloser Versand für alle Bestellungen über 100,00 $ oder mit einem Pro Tech Toolkit!

    Schau dich im Store um
  4. Gently pull off the front cover. The plate on the side should come off. Gently pull off the back cover.
    • Gently pull off the front cover.

    • The plate on the side should come off.

    • Gently pull off the back cover.

  5. The cases should now be removed.
    • The cases should now be removed.

  6. Clean around the function buttons with a cotton swab dipped in isopropyl alcohol.
    • Clean around the function buttons with a cotton swab dipped in isopropyl alcohol.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein weiterer Nutzer hat diese Anleitung absolviert.

Tyler Grossheim

Mitglied seit: 25.01.2011

1.359 Reputation

6 Anleitungen geschrieben

Team

Cal Poly, Team 3-32, Regan Winter 2011 Mitglied von Cal Poly, Team 3-32, Regan Winter 2011

CPSU-REGAN-W11S3G32

3 Mitglieder

8 Anleitungen geschrieben

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 1

Insgesamt: 1,819