Einleitung
Use this guide if the buttons of your Cobra SPX 5300 aren't working correctly.
Was du brauchst
-
-
Remove the four 9.5 mm Phillips #0 screws from the back of the device.
-
-
-
-
Remove the silver button plate by gripping one of the corners and pulling up.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
Eine weitere Person hat diese Anleitung absolviert.