Zum Hauptinhalt wechseln

Cobra SPX 5300 Buttons Replacement

Was du brauchst

  1. Cobra SPX 5300 Buttons Replacement, Windshield Bracket Mount: Schritt 1, Bild 1 von 2 Cobra SPX 5300 Buttons Replacement, Windshield Bracket Mount: Schritt 1, Bild 2 von 2
    • Remove the four 9.5 mm Phillips #0 screws from the back of the device.

  2. Cobra SPX 5300 Buttons Replacement: Schritt 2, Bild 1 von 2 Cobra SPX 5300 Buttons Replacement: Schritt 2, Bild 2 von 2
    • Pull the black plastic back case off of the device.

  3. Cobra SPX 5300 Buttons Replacement: Schritt 3, Bild 1 von 1
    • Lift up the motherboard and lay it flat next to the device.

    • Be careful not to sever the wires. The buttonboard is connected to the motherboard by the wires.

  4. Cobra SPX 5300 Buttons Replacement: Schritt 4, Bild 1 von 1
    • Remove the windshield bracket mount.

  5. Cobra SPX 5300 Buttons Replacement, Buttonboard: Schritt 5, Bild 1 von 1
    • Remove the four 4.8 mm Phillips #00 screws from the buttonboard.

  6. Cobra SPX 5300 Buttons Replacement: Schritt 6, Bild 1 von 1
    • Lift buttonboard to expose silver button plate.

  7. Cobra SPX 5300 Buttons Replacement, Buttons: Schritt 7, Bild 1 von 1
    • Remove the silver button plate by gripping one of the corners and pulling up.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.

Fanny Auad

Mitglied seit: 09/25/15

286 Reputation

2 Anleitungen geschrieben

Team

University of Tampa, Team 1-2, Whiteside Fall 2015 Mitglied von University of Tampa, Team 1-2, Whiteside Fall 2015

UT-WHITESIDE-F15S1G2

4 Mitglieder

5 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 1

Insgesamt: 436