Zum Hauptinhalt wechseln

Coleman Rechargeable Fluorescent Twin Tube Main Power Board Replacement

Was du brauchst

  1. Coleman Rechargeable Fluorescent Twin Tube Main Power Board Replacement, Battery: Schritt 1, Bild 1 von 2 Coleman Rechargeable Fluorescent Twin Tube Main Power Board Replacement, Battery: Schritt 1, Bild 2 von 2
    • Carefully turn the lantern upside down.

    • Remove the three 1.2 mm Phillips #0 screws from the base of the lantern.

  2. Coleman Rechargeable Fluorescent Twin Tube Main Power Board Replacement: Schritt 2, Bild 1 von 1
    • Carefully pull the bottom of the lantern to remove the base from the device.

  3. Coleman Rechargeable Fluorescent Twin Tube Main Power Board Replacement: Schritt 3, Bild 1 von 2 Coleman Rechargeable Fluorescent Twin Tube Main Power Board Replacement: Schritt 3, Bild 2 von 2
    • Gently pull the battery out of the slot and away from the base.

    • The battery may be held into place by adhesive strips.

  4. Coleman Rechargeable Fluorescent Twin Tube Main Power Board Replacement: Schritt 4, Bild 1 von 3 Coleman Rechargeable Fluorescent Twin Tube Main Power Board Replacement: Schritt 4, Bild 2 von 3 Coleman Rechargeable Fluorescent Twin Tube Main Power Board Replacement: Schritt 4, Bild 3 von 3
    • Carefully detach the negative wire from the battery terminal first.

    • Next, detach the positive wire from the battery terminal.

  5. Coleman Rechargeable Fluorescent Twin Tube Main Power Board Replacement, Main Power Board: Schritt 5, Bild 1 von 2 Coleman Rechargeable Fluorescent Twin Tube Main Power Board Replacement, Main Power Board: Schritt 5, Bild 2 von 2
    • Remove the single 1.2 mm Phillips #1 screw on the bottom of the lantern.

    • Remove the plastic barrier.

  6. Coleman Rechargeable Fluorescent Twin Tube Main Power Board Replacement: Schritt 6, Bild 1 von 2 Coleman Rechargeable Fluorescent Twin Tube Main Power Board Replacement: Schritt 6, Bild 2 von 2
    • Unscrew the single 1.2 mm Phillips #1 screw holding the motherboard to the plastic lantern housing.

  7. Coleman Rechargeable Fluorescent Twin Tube Main Power Board Replacement: Schritt 7, Bild 1 von 3 Coleman Rechargeable Fluorescent Twin Tube Main Power Board Replacement: Schritt 7, Bild 2 von 3 Coleman Rechargeable Fluorescent Twin Tube Main Power Board Replacement: Schritt 7, Bild 3 von 3
    • Gently grab the main board by the exposed PCB.

    • Pull the main board straight out of the housing.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Mathew Merrick

Mitglied seit: 09/17/18

169 Reputation

2 Anleitungen geschrieben

Team

Washington State, Team S2-G1, Hope Fall 2018 Mitglied von Washington State, Team S2-G1, Hope Fall 2018

WSU-HOPE-F18S2G1

4 Mitglieder

8 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 2

Letzte 7 Tage: 6

Letzte 30 Tage: 16

Insgesamt: 567