Einleitung
With a few tools, a little bit of time, and a moderate degree of commitment, you can replace a damaged display on ComNet Ericsson Panther 600P.
Was du brauchst
-
-
Look for the release button on the back of the radio.
-
Press the button and pull down on the battery at the same time. The battery will come free.
-
-
-
Twist the antenna counter-clockwise to unscrew it from the antenna jack.
-
-
-
-
Using a T15 Torx screwdriver, unscrew the two screws.
-
Using a plastic opening tool, pry the internal case from the external case.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Team
Eastern Washington University, Team 1-2, Carnegie Winter 2015 Mitglied von Eastern Washington University, Team 1-2, Carnegie Winter 2015
EWU-CARNEGIE-W15S1G2
4 Mitglieder
6 Anleitungen geschrieben
