Zum Hauptinhalt wechseln

Commodore 64 Opening the Case Prerequisite Guide

Was du brauchst

  1. Commodore 64 Opening the Case Prerequisite Guide, Removing screws: Schritt 1, Bild 1 von 3 Commodore 64 Opening the Case Prerequisite Guide, Removing screws: Schritt 1, Bild 2 von 3 Commodore 64 Opening the Case Prerequisite Guide, Removing screws: Schritt 1, Bild 3 von 3
    • 1. Remove three 6.75mm ph2 screw heads from the casing

  2. Commodore 64 Opening the Case Prerequisite Guide, Opening: Schritt 2, Bild 1 von 2 Commodore 64 Opening the Case Prerequisite Guide, Opening: Schritt 2, Bild 2 von 2
    • 2. Split the case of the C64 open by pulling up on the case towards you

    • Do not pull too hard that you break the clips.

    Good advice, but is there a reliable way of keeping the clips intact?

    coryengel - Antwort

Abschluss

To reassemble your device, follow these instructions in reverse order.

7 weitere Nutzer:innen haben diese Anleitung absolviert.

Team

USF Tampa, Team 13-6, Staggers Fall 2014 Mitglied von USF Tampa, Team 13-6, Staggers Fall 2014

USFT-STAGGERS-F14S13G6

4 Mitglieder

15 Anleitungen geschrieben

Ein Kommentar

Is the Commodore 64x with the same screw?

anon - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 1

Letzte 7 Tage: 7

Letzte 30 Tage: 31

Insgesamt: 5,101