Zum Hauptinhalt wechseln

Compaq Evo N1000v Palm Rest Replacement

Was du brauchst

  1. Compaq Evo N1000v Palm Rest Replacement, LED Cover: Schritt 1, Bild 1 von 1
    • Flip the laptop over with the rear panel facing forward.

  2. Compaq Evo N1000v Palm Rest Replacement: Schritt 2, Bild 1 von 1
    • Using a TR8 Torx screwdriver, remove the two T8 Torx screws that secure the LED cover to the base enclosure.

  3. Compaq Evo N1000v Palm Rest Replacement: Schritt 3, Bild 1 von 1
    • Flip the laptop back over with the front facing forward. Open the screen.

  4. Compaq Evo N1000v Palm Rest Replacement: Schritt 4, Bild 1 von 1
    • Locate the F1 and F2 keys near the top left corner of the keyboard.

  5. Compaq Evo N1000v Palm Rest Replacement: Schritt 5, Bild 1 von 1
    • While holding the F1 and F2 keys, insert a spudger between the keys into the notch in the LED cover. Lift up.

  6. Compaq Evo N1000v Palm Rest Replacement: Schritt 6, Bild 1 von 1
    • Locate the Scroll and Pause keys near the top right corner of the keyboard.

  7. Compaq Evo N1000v Palm Rest Replacement: Schritt 7, Bild 1 von 1
    • While holding the Scroll and Pause keys, insert a spudger between the keys into the notch in the LED cover. Lift up.

  8. Compaq Evo N1000v Palm Rest Replacement: Schritt 8, Bild 1 von 2 Compaq Evo N1000v Palm Rest Replacement: Schritt 8, Bild 2 von 2
    • Insert a spudger between the F7 and F8 keys. Lift up to remove the LED cover.

  9. Compaq Evo N1000v Palm Rest Replacement, Keyboard: Schritt 9, Bild 1 von 1
    • Lift the back edge of the keyboard and pull towards the screen.

  10. Compaq Evo N1000v Palm Rest Replacement: Schritt 10, Bild 1 von 1
    • Pull the cable and lift up to release.

  11. Compaq Evo N1000v Palm Rest Replacement: Schritt 11, Bild 1 von 1
    • Remove the keyboard.

  12. Compaq Evo N1000v Palm Rest Replacement, Palm Rest: Schritt 12, Bild 1 von 1
    • Close the laptop and flip it so the rear panel is facing up.

  13. Compaq Evo N1000v Palm Rest Replacement: Schritt 13, Bild 1 von 1
    • Using the TR8 Torx screwdriver, remove the six screws from the back case.

  14. Compaq Evo N1000v Palm Rest Replacement: Schritt 14, Bild 1 von 1
    • Remove the battery.

    • Remove the screw from the metal support on the case edge with a Torx T8 screwdriver.

    • Flip the laptop over again so the top is facing up.

    • Open the laptop screen and face it towards you.

  15. Compaq Evo N1000v Palm Rest Replacement: Schritt 15, Bild 1 von 1
    • Lift the the palm rest up from the front edge of the laptop and swing it towards the screen.

    • Be gentle as it is connected by some cables.

  16. Compaq Evo N1000v Palm Rest Replacement: Schritt 17, Bild 1 von 1
    • Disconnect the second ribbon cable.

  17. Compaq Evo N1000v Palm Rest Replacement: Schritt 18, Bild 1 von 1
    • Remove the palm rest.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.

Team

Cal Poly, Team 29-74, Johann Spring 2010 Mitglied von Cal Poly, Team 29-74, Johann Spring 2010

CPSU-JOHANN-S10S29G74

3 Mitglieder

14 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 3

Insgesamt: 3,071