Zum Hauptinhalt wechseln

Einleitung

Use this guide to access and replace your RAM. Assembly is reverse of disassembly. Consider utilizing an electrostatic discharge strap to protect components from damage. Disconnect all power sources and remove the battery pack before beginning this repair.

  1. Unscrew the two screws on the bottom of the laptop covering the memory compartment and remove the cover. The screws are attached to the panel.
    • Unscrew the two screws on the bottom of the laptop covering the memory compartment and remove the cover.

    • The screws are attached to the panel.

  2. Push out side tabs and pull out old RAM module.  Insert new module in place of old module.  Be sure to evenly insert 'gold pins' in the same orientation that the old module was removed.  While sliding module in, press side tabs in place (red rectangles in picture).
    • Push out side tabs and pull out old RAM module. Insert new module in place of old module. Be sure to evenly insert 'gold pins' in the same orientation that the old module was removed. While sliding module in, press side tabs in place (red rectangles in picture).

  3. Reinstall cover and screws.
    • Reinstall cover and screws.

Abschluss

To reassemble your device(possibly install a new RAM), follow these instructions in reverse order.

3 weitere Nutzer haben diese Anleitung absolviert.

alea

Mitglied seit: 06.10.2010

1.366 Reputation

14 Anleitungen geschrieben

Team

Cal Poly, Team 22-2, Maness Fall 2010 Mitglied von Cal Poly, Team 22-2, Maness Fall 2010

CPSU-MANESS-F10S22G2

6 Mitglieder

20 Anleitungen geschrieben

Kommentar hinzufügen

Seitenaufrufe:

Letzten 24 Stunden: 0

Letzten 7 Tage: 1

Letzten 30 Tage: 7

Insgesamt: 5,671