Einleitung
You will look at this short guide to get to a place where you can replace the On/Off Switch or Cool Down Button.
Was du brauchst
-
-
Unscrew the two 18 mm long Phillips #2 screws on the side of the hair dryer.
-
-
-
-
Once you have taken the screws out, take the top half of the handle off by lifting it off of the dryer.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
Eine weitere Person hat diese Anleitung absolviert.