Einleitung

This guide will build off of the Housing and Power Cord Removal guides to remove and replace the motherboard.

  1. Remove the Philips #1 28 mm.
    • Remove the Philips #1 28 mm.

    • Make sure device is unplugged and cool before attempting to replace parts.

    Kommentar hinzufügen

  2. Remove the Philips #1 22 mm screws.
    • Remove the Philips #1 22 mm screws.

    Kommentar hinzufügen

    • Pry off the housing using a plastic spudger.

    Kommentar hinzufügen

    • Pull power chord out.

    Kommentar hinzufügen

    • Heat up your soldering gun and desolder the red wire from the motherboard as shown.

    • Note the location of wire attachment.

    Kommentar hinzufügen

    • With your soldering gun, desolder the white wire from the motherboard as shown.

    • Note the location of wire attachment.

    Kommentar hinzufügen

    • Once both wires are desoldered the motherboard can be removed.

    Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order, making sure to resolder the wires correctly into the replacement motherboard.

Jonathon Bruer

Mitglied seit 09.11.2017

553 Reputation

5 Anleitungen geschrieben

Team

IUPUI, Team S7-G5, Baechle Fall 2017 Mitglied von IUPUI, Team S7-G5, Baechle Fall 2017

IUPUI-BAECHLE-F17S7G5

3 Mitglieder

5 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 1

Insgesamt: 82