Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.
Einleitung
If you think that your hair dryer's fan motor is being clogged with loose hair, use this guide to remove the motor for cleaning.
Was du brauchst
-
-
-
Starting from where the cord attaches to the handle, pull apart the two plastic panels.
-
Continue separating the back panel, working along the seam.
-
With moderate force, completely remove the back panel from the hair dryer.
-
-
-
Hold the hair dryer by the nozzle so that the handle points to the left.
-
Remove the two 1-inch Phillips #2 screws from the back of the fan motor.
-
-
-
Pull on the back of the fan motor to gently lift the motor out of the hair dryer.
-
Lift the attached electrical wiring and heat shield completely out of the hair dryer.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
3 weitere Nutzer:innen haben diese Anleitung absolviert.