Einleitung
This guide will tell you how to replace the face of the Crosley 33301 alarm clock.
Was du brauchst
-
-
-
Rotate Clock till the face/or front is pointing away from you.
-
Continue on by unscrewing the 5.5 millimeter screws with your hands.
-
Once all the screws are removed, take the circular back panel off and lay it down flat on a stable surface to put back on later.
Frag FixBot
-
-
-
-
You will notice that there are three small indents on alternate sides.
-
You will see small slits where the indents can slide through.
-
Twist the center counter clockwise so that the face and the back are no longer connected.
-
-
-
Replace the front of the clock with your new glass face protector and settle it on the frame.
-
-
-
Apply the clock face back on the frame, then reverse your steps. Take a step back and admire your handiwork!
-
-
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
2 weitere Personen haben diese Anleitung absolviert.
Team
Central Coast New Tech High, Team 4-5, Rushing Spring 2016 Mitglied von Central Coast New Tech High, Team 4-5, Rushing Spring 2016
CCNTH-RUSHING-S16S4G5
2 Mitglieder
12 Anleitungen geschrieben
