Cupboard Drawer handle Replacement

Einleitung

Most handles get broken or wobbly after a while. The handles on drawers in desks, cabinets, and other furniture may break off when a substantial object hits them. Moving furniture from one building to another can also cause this damage if the drawers are not properly secured. In this guide, I will be demonstrating how to repair a broken handle of a wooden cupboard.

In step 1 of the guide, you will need to take out the drawer out of the cupboard .Remove the belongings of the drawer before taking out the drawer.

Was du brauchst

Schritt 1 Handle

Cupboard Drawer handle Replacement, Handle: Schritt 1, Bild 1 von 1

Remove the drawer from the cupboard and empty the contents.

Bearbeiten

Schritt 2

Tighten the good side of the handle by rotating the screwdriver in a clockwise direction.

Bearbeiten

Schritt 3

Cupboard Drawer handle Replacement: Schritt 3, Bild 3 von 3

Take a screw with a similar radius of the handle’s hole for the drawer.

Bearbeiten

Schritt 4

Cupboard Drawer handle Replacement: Schritt 4, Bild 3 von 3

Line up the hole or holes on the back of the handle with the holes in the front plate of the drawer.
Take the screw and insert it in the hole at the back of the drawer.

Bearbeiten

Schritt 5

Cupboard Drawer handle Replacement: Schritt 5, Bild 3 von 3

Adjust the screw in a way that it stays in a straight line.
Slowly rotate the screw clockwise and in a straight position so that the handle stays erect.

Bearbeiten