Einleitung
This guide will teach you to easily repair and replace a small metal jump ring on a dangle earring that may have broken. This guide is applicable to any dangle earring with a stud or hoop and can be easily done at home within 30 minutes. To ensure a successful repair carefully follow the step provided with the listed parts.
Was du brauchst
-
-
Locate where the earring stud/hook has detached.
-
Look at the two pieces of the dangle earrings for a small loop or jump ring on both pieces.
-
-
-
Using a chain nose plier, carefully grip the jump ring by its side.
-
Use a cutting plier to cut a small opening in the loop.
-
-
-
With both pliers use the cutting plier to gently grip the side of the small jump ring.
-
Using the small nose chain pliers pull back on the small jump ring to create an opening.
-
-
-
-
With the small chain nose pliers grip the jump ring.
-
Insert the stud/hook portion of the earring into the jump ring.
-
-
-
Use the jump ring to reattach the the stud.
-
With the small chain nose pliers grip the jump ring.
-
Insert the main portion of the earring into the jump ring with the stud/hoop.
-
-
-
Use both pliers to close the loop.
-
Firmly grip the edge of the loop using a pair of cutting pliers.
-
With a pair of small chain grip pliers gently push the end of the jump ring forward to close the loop.
-
-
-
Gently tug on either side of the earring to ensure the loop is closed securely.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Team
York University, Team R-7, Melo-Thaiss Winter 2022 Mitglied von York University, Team R-7, Melo-Thaiss Winter 2022
YORK-MELO-THAISS-W22SRG7
1 Mitglied
1 Anleitung geschrieben
