Was du brauchst
-
-
Flip the device on its head.
-
Using the Phillips #2 screwdriver, unscrew the four 12 mm screws found at each corner of the bottom panel.
-
Lift the panel off or flip the device over and let the panel drop out.
-
-
Fast fertig!
To reassemble your device, follow these instructions in reverse order.
Abschluss
To reassemble your device, follow these instructions in reverse order.
Team
Cal Poly, Team 4-2, Maness Fall 2015 Mitglied von Cal Poly, Team 4-2, Maness Fall 2015
CPSU-MANESS-F15S4G2
4 Mitglieder
25 Anleitungen geschrieben
