Einleitung
This guide will show you how to replace the black air filter cap located on the top of the motor.
Was du brauchst
-
-
Using a T-20 hex head screw, unscrew the two screws located at the top and bottom of the black air filter. The screws are directly above and below the yellow lettering.
-
-
-
-
Use your hands to pull the black air filter away from the body of the saw to detach.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.
Team
Cal Poly, Team 8-2, Banghart Winter 2017 Mitglied von Cal Poly, Team 8-2, Banghart Winter 2017
CPSU-BANGHART-W17S8G2
3 Mitglieder
5 Anleitungen geschrieben
