Einleitung

In this guide, we will be removing and replacing the solid-state drive.

WARNING: Before working inside your computer, read the  safety information that shipped with your computer and  follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.
  • WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.

  • Remove the screws that secure the solid-state drive bracket to the solid-state drive assembly.

Kommentar hinzufügen

Using the pull tab, pivot the solid-state drive bracket and peel off the  bracket from the tabs on the computer base.
  • Using the pull tab, pivot the solid-state drive bracket and peel off the bracket from the tabs on the computer base.

Kommentar hinzufügen

  • Using the pull tab, disconnect the solid-state drive cable from the system board.

Kommentar hinzufügen

  • Remove the screws that secure the solid-state drive assembly to the computer base.

Kommentar hinzufügen

  • Lift the solid-state drive assembly off the computer base.

Kommentar hinzufügen

  • Remove the screw that secures the solid-state drive to the solid-state drive assembly.

Kommentar hinzufügen

  • Slide and lift the solid-state drive off the solid-state drive assembly.

Kommentar hinzufügen

  • Slide the NEW solid-state drive into the slot on the solid-state drive assembly.

Kommentar hinzufügen

  • Replace the screw that secures the solid-state drive to the solid-state drive assembly.

Kommentar hinzufügen

  • Align the screw holes on the solid-state drive assembly with the screw holes on the computer base.

Kommentar hinzufügen

  • Replace the screws that secure the solid-state drive assembly to the computer base.

Kommentar hinzufügen

  • Connect the solid-state drive cable to the system board.

Kommentar hinzufügen

  • Align the screw holes on the solid-state drive bracket with the screw holes on the solid-state drive assembly.

Kommentar hinzufügen

  • Replace the screws that secure the solid-state drive bracket to the solid-state drive assembly.

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Terrence15

Mitglied seit 18.12.2017

69.521 Reputation

442 Anleitungen geschrieben

Team

Informative Technologies Inc. Mitglied von Informative Technologies Inc.

Community

15 Mitglieder

917 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 4

Insgesamt: 23