Einleitung

In this guide, we will show you how to remove and replace the wireless card.

Werkzeuge

Kein Werkzeug erforderlich.

Ersatzteile

Kein Ersatzteil erforderlich.

  1. WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.
    • WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.

    • Loosen the five captive screws that secure the base cover to the computer base.

    Kommentar hinzufügen

  2. Using a plastic scribe, gently pry the base cover to release the tabs on the base cover from the slots on the computer base.
    • Using a plastic scribe, gently pry the base cover to release the tabs on the base cover from the slots on the computer base.

    Kommentar hinzufügen

    • Lift the base cover off the computer base.

    Kommentar hinzufügen

    • Using a plastic scribe, disconnect the battery cable from the system board.

    Kommentar hinzufügen

    • Press and hold the power button for five seconds to ground the system board.

    Kommentar hinzufügen

    • Connect the battery cable to the system board.

    Kommentar hinzufügen

    • Slide the tabs on the NEW base cover into the slots on the computer base and snap the base cover into place

    Kommentar hinzufügen

    • Tighten the five captive screws that secure the base cover to the computer base.

    Kommentar hinzufügen

    • WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.

    • CAUTION: To avoid damaging the wireless card, do not place any cables under it.

    • Remove the screw (M2x3) that secures the wireless card and bracket to the computer base.

    Kommentar hinzufügen

    • Lift the wireless-card bracket off the wireless card.

    Kommentar hinzufügen

    • Disconnect the antenna cables from the wireless card.

    Kommentar hinzufügen

    • CAUTION: To avoid damaging the wireless card, do not place any cables under it.

    • Align the notch on the wireless card with the tab on the wireless-card slot.

    Kommentar hinzufügen

    • Slide the NEW wireless card at an angle into the wireless-card slot.

    Kommentar hinzufügen

    • Connect the antenna cables to the wireless card.

    Kommentar hinzufügen

    • Align the screw hole on the wireless-card bracket with the screw hole on the wireless card and the computer base.

    Kommentar hinzufügen

    • Replace the screw (M2x3) that secures the wireless-card bracket to the wireless card and the computer base.

    Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Terrence15

Mitglied seit 18.12.2017

69.949 Reputation

442 Anleitungen geschrieben

Team

Informative Technologies Inc. Mitglied von Informative Technologies Inc.

Community

15 Mitglieder

925 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 5

Insgesamt: 44