Einleitung

In this guide, we will show you how to remove and replace the Battery.

Werkzeuge

Kein Werkzeug erforderlich.

Ersatzteile

Kein Ersatzteil erforderlich.

  1. WARNING:  Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before You Begin. . After working inside your computer, follow the instructions in "After Working Inside Your Computer".
    • WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before You Begin. . After working inside your computer, follow the instructions in "After Working Inside Your Computer".

    • Close the display, and turn the computer over.

  2. Remove the screws that secure the base cover to the computer base. Remove the screws that secure the base cover to the computer base.
    • Remove the screws that secure the base cover to the computer base.

  3. Slide and lift the base cover off the computer base.
    • Slide and lift the base cover off the computer base.

  4. Align the tabs on the NEW base cover with the slots on the computer base and slide the base cover into place.
    • Align the tabs on the NEW base cover with the slots on the computer base and slide the base cover into place.

  5. Replace the screws that secure the base cover to the computer base.
    • Replace the screws that secure the base cover to the computer base.

  6. Turn the computer over and open the display.
    • Turn the computer over and open the display.

  7. Kostenloser Versand für alle Bestellungen über 100 $ oder mit einem Pro Tech Toolkit!

    Schau dich im Store um
  8. WARNING:  Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer.   After working inside your computer, follow the instructions in After Working Inside Your Computer.
  9. Remove the screws that secure the battery to the computer base.
    • Remove the screws that secure the battery to the computer base.

  10. Using the battery cable, lift the battery and release it from the tabs on the computer base.
    • Using the battery cable, lift the battery and release it from the tabs on the computer base.

  11. Turn the computer over and open the display as far as possible.
    • Turn the computer over and open the display as far as possible.

  12. Press and hold the power button for five seconds to ground the system board.
    • Press and hold the power button for five seconds to ground the system board.

    • Close the display and turn the computer over.

  13. Align the tabs on the NEW battery with  the slots on the computer base.
    • Align the tabs on the NEW battery with the slots on the computer base.

  14. Align the screw holes on the battery with  the screw holes on the computer base.
    • Align the screw holes on the battery with the screw holes on the computer base.

  15. Replace the screws that secure the battery to the computer base.
    • Replace the screws that secure the battery to the computer base.

  16. Connect the battery cable to the system-board connector.
    • Connect the battery cable to the system-board connector.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein weiterer Nutzer hat diese Anleitung absolviert.

Terrence15

Mitglied seit: 18.12.2017

70.547 Reputation

442 Anleitungen geschrieben

Team

Informative Technologies Inc. Mitglied von Informative Technologies Inc.

Community

15 Mitglieder

925 Anleitungen geschrieben

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 13

Letzte 30 Tage: 40

Insgesamt: 420