Zum Hauptinhalt wechseln

Einleitung

In this guide, we will show you how to remove and replace the Memory Modules.

Ersatzteile

Keine Ersatzteile angegeben.

  1. WARNING: Before working inside your computer, read the safety  information that shipped with your computer and follow the steps in Before You Begin.
    • WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before You Begin.

    • Remove the screws that secure the memory-module cover to the palm rest assembly.

  2. CAUTION: To prevent damage to the memory-module connector, do  not use tools to spread the memory module securing clips.
    • CAUTION: To prevent damage to the memory-module connector, do not use tools to spread the memory module securing clips.

    • Use your fingertips to carefully spread apart the securing clips on each end of the memory-module connector until the memory module pops up.

  3. Remove the memory module from the memory-module connector. Remove the memory module from the memory-module connector.
    • Remove the memory module from the memory-module connector.

  4. MacBook Akku Fix Kits

    Ab $69.99

    Buy Now

    MacBook Akku Fix Kits

    Ab $69.99

    Buy Now
  5. NOTE: If you need to install memory modules in two connectors, install a memory  module in the lower connector before you install a memory module in the upper  connector.
    • NOTE: If you need to install memory modules in two connectors, install a memory module in the lower connector before you install a memory module in the upper connector.

    • Align the notch in the NEW memory module with the tab on the memory-module connector.

  6. Slide the memory module firmly into the connector at a 45-degree angle, and press the memory module down until it clicks into place. If you do not hear the click, remove the memory module and reinstall it.
    • Slide the memory module firmly into the connector at a 45-degree angle, and press the memory module down until it clicks into place. If you do not hear the click, remove the memory module and reinstall it.

  7. NOTE: If the memory module is not installed properly, the computer may not boot.
    • NOTE: If the memory module is not installed properly, the computer may not boot.

    • Align the screw holes on the memory-module cover with the screw holes on the palm rest assembly.

  8. Replace the screws that secure the memory-module cover to the palm rest  assembly.
    • Replace the screws that secure the memory-module cover to the palm rest assembly.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Terrence15

Mitglied seit: 18.12.2017

70.785 Reputation

431 Anleitungen geschrieben

Team

Informative Technologies Inc. Mitglied von Informative Technologies Inc.

Community

15 Mitglieder

914 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 2

Letzte 30 Tage: 14

Insgesamt: 188