Was du brauchst
-
-
Unscrew the nine PH#0 captive screws on the bottom of the device.
-
Use a pick to run along the outside of the device popping all the clips. Prying should not be necessary.
-
-
-
-
Pull carefully, but firmly, on the battery cable until it becomes detached.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.