1. First turn over your computer and remove all of the rubber stoppers on the back.
    • First turn over your computer and remove all of the rubber stoppers on the back.

  2. Then remove all the screws that were under the rubber stoppers.
    • Then remove all the screws that were under the rubber stoppers.

    • Take the screw out of the back plate.

    • Remove back plate by grabbing and lifting up.

    • Remove CD port by pulling it straight out.

    • Remove the keyboard.

    • Take screw out of the surface below the keyboard and remove the top layer of the computer off of the base.

    • Remove the battery by unscrewing the 5 screws and pull straight out.

    • Remove the three screws from the hard drive and remove by pulling straight out.

    • Unscrew motherboard and remove the two clips.

    • Flip motherboard up, unscrew the three screws, and unclip the fan.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 6

Letzte 30 Tage: 19

Insgesamt: 153