Einleitung

Use this guide to replace the back cover of your device. You'll need a Phillips #0 Screwdriver and a couple of plastic opening tools to complete this guide.

Ersatzteile

Kein Ersatzteil erforderlich.

  1. Flip your device over so the back cover is facing you.
    • Flip your device over so the back cover is facing you.

    • Using a Phillips #0 Screwdriver, remove the ten 7mm screws holding the back cover in place.

    Kommentar hinzufügen

  2. Insert a plastic opening and run it along the edge of the back cover. Do this until the entire back cover can be removed.
    • Insert a plastic opening and run it along the edge of the back cover. Do this until the entire back cover can be removed.

    Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Justin Ogihara

Mitglied seit 18.09.2017

2.646 Reputation

11 Anleitungen geschrieben

Team

iFixit Mitglied von iFixit

Community

114 Mitglieder

7.029 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 1

Letzte 7 Tage: 6

Letzte 30 Tage: 11

Insgesamt: 133