Zum Hauptinhalt wechseln

Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.

Dell Inspiron 13-7359 Cooling Fan Replacement

Was du brauchst

  1. Dell Inspiron 13-7359 Cooling Fan Replacement, Back Cover: Schritt 1, Bild 1 von 1
    • Flip your device over so the back cover is facing you.

    • Using a Phillips #0 Screwdriver, remove the ten 7mm screws holding the back cover in place.

  2. Dell Inspiron 13-7359 Cooling Fan Replacement: Schritt 2, Bild 1 von 1
    • Insert a plastic opening and run it along the edge of the back cover. Do this until the entire back cover can be removed.

  3. Dell Inspiron 13-7359 Cooling Fan Replacement, Cooling Fan: Schritt 3, Bild 1 von 2 Dell Inspiron 13-7359 Cooling Fan Replacement, Cooling Fan: Schritt 3, Bild 2 von 2
    • Unscrew and remove the 2 of the 7mm Phillips head screws holding the cooling fan in place.

  4. Dell Inspiron 13-7359 Cooling Fan Replacement: Schritt 4, Bild 1 von 1
    • Hold the cooling fan with one hand.

    • With the other hand, grab hold of the part of the copper heat sink that is attached to the cooling fan.

    • Carefully pull the cooling fan away from the attached part so that it becomes fully disconnected.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.

Team

Baylor, Team S1-G6, Johnson Spring 2018 Mitglied von Baylor, Team S1-G6, Johnson Spring 2018

BU-JOHNSON-S18S1G6

3 Mitglieder

5 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 2

Letzte 30 Tage: 3

Insgesamt: 614