Zum Hauptinhalt wechseln

Einleitung

In this guide, we will be showing you how to remove and replace the Display Assembly.

Ersatzteile

Keine Ersatzteile angegeben.

  1. Follow the instructions in Before You Begin.
    • Follow the instructions in Before You Begin.

    • Turn the computer over.

    • Disconnect the Mini-Card antenna cables from the computer base.

  2. Turn the computer over and open the display as far as possible.
    • Turn the computer over and open the display as far as possible.

  3. Disconnect the display cable and the camera cable from their connectors on the system board.
    • Disconnect the display cable and the camera cable from their connectors on the system board.

  4. MacBook Akku Fix Kits

    Ab $69.99

    Buy Now

    MacBook Akku Fix Kits

    Ab $69.99

    Buy Now
  5. Make a note of the routing of the Mini-Card antenna cables and remove the cables from the routing guides.
    • Make a note of the routing of the Mini-Card antenna cables and remove the cables from the routing guides.

  6. Remove the six screws (three on each side) that secure the display assembly to the computer base.
    • Remove the six screws (three on each side) that secure the display assembly to the computer base.

  7. Lift and remove the display assembly off the computer base.
    • Lift and remove the display assembly off the computer base.

  8. Place the NEW display assembly in position and replace the six screws (three on each side) that secure the display assembly to the computer base. Place the NEW display assembly in position and replace the six screws (three on each side) that secure the display assembly to the computer base.
    • Place the NEW display assembly in position and replace the six screws (three on each side) that secure the display assembly to the computer base.

  9. Route the Mini-Card antenna cables through the slot on the computer base.
    • Route the Mini-Card antenna cables through the slot on the computer base.

  10. Connect the display cable and the camera cable to their connectors on the system board.
    • Connect the display cable and the camera cable to their connectors on the system board.

Ziellinie

Terrence15

Mitglied seit: 18.12.2017

70.785 Reputation

431 Anleitungen geschrieben

Team

Informative Technologies Inc. Mitglied von Informative Technologies Inc.

Community

15 Mitglieder

914 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 2

Insgesamt: 33