Einleitung

In this guide, we will show you how to remove and replace the Hard Drive.

Ersatzteile

Kein Ersatzteil erforderlich.

  1. CAUTION: Before working inside your computer, read the safety information that shipped with your computer. Follow the procedures in  Before You Begin.
    • CAUTION: Before working inside your computer, read the safety information that shipped with your computer. Follow the procedures in Before You Begin.

    • CAUTION: If you remove the hard drive from the computer when the drive is hot, do not touch the metal housing of the hard drive.

    • Remove the two screws securing the hard drive assembly to the system board.

    Kommentar hinzufügen

  2. Holding the connector end of the hard drive assembly, pull the hard drive assembly from the system board connector.
    • Holding the connector end of the hard drive assembly, pull the hard drive assembly from the system board connector.

    Kommentar hinzufügen

    • Press down on the hard drive at the non-connector end slot to remove the hard drive off the hard drive cage.

    Kommentar hinzufügen

    • Place the NEW hard drive in the hard drive cage and press it down until it snaps into place.

    Kommentar hinzufügen

    • Push down the hard drive assembly in place by aligning the hard drive connector with the system board connector.

    Kommentar hinzufügen

    • Replace the two screws securing the hard drive assembly to the system board.

    Kommentar hinzufügen

Ziellinie

Terrence15

Mitglied seit 18.12.2017

69.949 Reputation

442 Anleitungen geschrieben

Team

Informative Technologies Inc. Mitglied von Informative Technologies Inc.

Community

15 Mitglieder

925 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 2

Insgesamt: 22