Einleitung

In this guide, we will show you how to remove and replace the Display Assembly.

  1. WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the procedures in  Before You Begin. CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal  surface.
    • WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the procedures in Before You Begin.

    • CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface.

    • Remove the two screws from the computer base.

  2. Disconnect the camera cable from the system board connector.
    • Disconnect the camera cable from the system board connector.

  3. Make note of the Mini-Card antenna cables, camera cable, and the display cable routing and remove the cables from their routing guides.
    • Make note of the Mini-Card antenna cables, camera cable, and the display cable routing and remove the cables from their routing guides.

  4. Kostenloser Versand für alle Bestellungen über 100 $ oder mit einem Pro Tech Toolkit!

    Schau dich im Store um
  5. Remove the two screws that secure the display assembly to the computer base.
    • Remove the two screws that secure the display assembly to the computer base.

  6. Lift and remove the display assembly from the computer base.
    • Lift and remove the display assembly from the computer base.

  7. Place the NEW display assembly in position and replace the two screws that secure the display assembly to the computer base.
    • Place the NEW display assembly in position and replace the two screws that secure the display assembly to the computer base.

  8. Route the Mini-Card antenna cables, camera cable, and display cable through the routing guides.
    • Route the Mini-Card antenna cables, camera cable, and display cable through the routing guides.

  9. Connect the camera cable to the system board connector.
    • Connect the camera cable to the system board connector.

  10. Replace the two screws at the bottom of the computer. Replace the two screws at the bottom of the computer.
    • Replace the two screws at the bottom of the computer.

Ziellinie

Terrence15

Mitglied seit: 18.12.2017

70.577 Reputation

442 Anleitungen geschrieben

Team

Informative Technologies Inc. Mitglied von Informative Technologies Inc.

Community

15 Mitglieder

925 Anleitungen geschrieben

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 2

Letzte 30 Tage: 2

Insgesamt: 62