Einleitung

In this guide, we will be showing you how to remove and replace the Display Assembly.

Ersatzteile

Kein Ersatzteil erforderlich.

  1. WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the instructions in "Before You Begin".
    • WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the instructions in "Before You Begin".

    • CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

    • Remove the two screws that secure the display assembly to the computer base.

  2. Turn the computer over and open the display as far as possible.
    • Turn the computer over and open the display as far as possible.

  3. Lift the connector latch and disconnect the display cable from the connector on the system board.
    • Lift the connector latch and disconnect the display cable from the connector on the system board.

  4. Note the routing of the display, camera, and mini-card antenna cables, and remove the cables from their routing guides.
    • Note the routing of the display, camera, and mini-card antenna cables, and remove the cables from their routing guides.

  5. Kostenloser Versand für alle Bestellungen über 100 $ oder mit einem Pro Tech Toolkit!

    Schau dich im Store um
  6. Remove the two screws that secure the display assembly to the computer base.
    • Remove the two screws that secure the display assembly to the computer base.

  7. Lift the display assembly off the computer base.
    • Lift the display assembly off the computer base.

  8. Place the NEW display assembly in position and replace the two screws that secure the display assembly to the computer base. NOTE: Ensure that no cables are caught between the display assembly and the computer base.
    • Place the NEW display assembly in position and replace the two screws that secure the display assembly to the computer base.

    • NOTE: Ensure that no cables are caught between the display assembly and the computer base.

  9. Route the display, camera, and mini-card antenna cables through their routing guides.
    • Route the display, camera, and mini-card antenna cables through their routing guides.

  10. Slide the display cable in the connector on the system board and press down the latch to secure the cable.
    • Slide the display cable in the connector on the system board and press down the latch to secure the cable.

  11. Turn the computer over.
    • Turn the computer over.

    • Replace the two screws that secure the display assembly to the computer base.

Ziellinie

Terrence15

Mitglied seit: 18.12.2017

70.653 Reputation

442 Anleitungen geschrieben

Team

Informative Technologies Inc. Mitglied von Informative Technologies Inc.

Community

15 Mitglieder

925 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 4

Insgesamt: 17