Einleitung

In this guide, we will be showing you how to remove and replace the Display Assembly.

Ersatzteile

Kein Ersatzteil erforderlich.

  1. WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.
    • WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.

    • Remove the three screws (2.5x8) that secure the display hinges to the palm-rest assembly.

    Kommentar hinzufügen

  2. Open the display hinges to an angle of 90 degrees.
    • Open the display hinges to an angle of 90 degrees.

    Kommentar hinzufügen

    • Peel the tape that secures the display cable to the palm-rest assembly.

    Kommentar hinzufügen

    • Open the latch and disconnect the display cable.

    Kommentar hinzufügen

    • Open the latch and disconnect the display cable.

    Kommentar hinzufügen

    • Note the display cable routing and remove the display cable from the routing guides on the palm-rest assembly.

    Kommentar hinzufügen

    • Note the antenna cable routing and remove the cable from its routing guides on the palm-rest assembly.

    Kommentar hinzufügen

    • Open the palm-rest assembly at an angle and slide it off the display assembly.

    Kommentar hinzufügen

    • Place the NEW display assembly on a clean, flat surface.

    Kommentar hinzufügen

    • Place the palm-rest assembly on the display assembly.

    Kommentar hinzufügen

    • Close the display hinges and align the screw holes on the display hinges with the screw holes on the palm-rest assembly.

    Kommentar hinzufügen

    • Replace the three screws (2.5x8) that secure the display hinges to the palm-rest assembly.

    Kommentar hinzufügen

    • Route the antenna cables through the routing guides on the palm-rest assembly.

    Kommentar hinzufügen

    • Connect the display cable and close the latch to secure the cable.

    Kommentar hinzufügen

    • Route the display cable through the routing guides on the palm-rest assembly

    Kommentar hinzufügen

    • Adhere the tape that secures the display cable to the palm-rest assembly.

    Kommentar hinzufügen

    • Close the display and turn the computer over.

    Kommentar hinzufügen

Ziellinie

Terrence15

Mitglied seit 18.12.2017

69.919 Reputation

442 Anleitungen geschrieben

Team

Informative Technologies Inc. Mitglied von Informative Technologies Inc.

Community

15 Mitglieder

925 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 2

Letzte 7 Tage: 7

Letzte 30 Tage: 17

Insgesamt: 83