Zum Hauptinhalt wechseln

Einleitung

If your laptop is unresponsive or you have a consistently low battery life, we recommend starting with our troubleshooting guide. If those tips don't solve your problem, then follow this guide to replace your battery.

Ersatzteile

Keine Ersatzteile angegeben.

  1. Remove the ten 7.9 mm screws with the Phillips #1 screwdriver.
    • Remove the ten 7.9 mm screws with the Phillips #1 screwdriver.

  2. Insert metal spudger into a gap in between the back panel and the back of the screen. Pry off the back panel using the metal spudger as a lever, and remove the back panel by lifting the rest off by hand.
    • Insert metal spudger into a gap in between the back panel and the back of the screen.

    • Pry off the back panel using the metal spudger as a lever, and remove the back panel by lifting the rest off by hand.

  3. Remove the two 7.8 mm long screws on the left side of the battery with the Phillips #1 screwdriver. Remove the two 7.8 mm long screws on the left side of the battery with the Phillips #1 screwdriver.
    • Remove the two 7.8 mm long screws on the left side of the battery with the Phillips #1 screwdriver.

  4. Pull out the fabric clip that attaches the battery to the main board from the connector by hand.
    • Pull out the fabric clip that attaches the battery to the main board from the connector by hand.

    • Remove the battery from the device.

Abschluss

To reassemble your device, follow these instructions in reverse order.

6 weitere Nutzer haben diese Anleitung absolviert.

Inaki Madrigal

Mitglied seit: 23.04.2018

715 Reputation

6 Anleitungen geschrieben

Team

Cal Poly, Team S24-G9, Maness Spring 2018 Mitglied von Cal Poly, Team S24-G9, Maness Spring 2018

CPSU-MANESS-S18S24G9

4 Mitglieder

6 Anleitungen geschrieben

Thanks! Very helpful and to the point!

You ARE TECHNICALLY missing one step however, removing the fabric ribbon from the old battery at the end. Yes, it seems like common sense but…

Anyways, thanks.

Thomas Keats - Antwort

Thanks for the help, worked well.

Remember the connector needs to be removed from the old battery and re-installed in the new. I used a small slotted screwdriver.

A. Holness

June 7, 2020

andrew.w.holness - Antwort

Kommentar hinzufügen

Statistik anzeigen:

Letzten 24 Stunden: 1

Letzten 7 Tage: 9

Letzten 30 Tage: 83

Insgesamt: 4,482