Einleitung

In this guide, we will be showing you how to remove and replace the Hard Drive.

Werkzeuge

Kein Werkzeug erforderlich.

Ersatzteile

Kein Ersatzteil erforderlich.

  1. WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the instructions in "Before You Begin".
    • WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the instructions in "Before You Begin".

    • CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

    • Turn off the computer and turn it over.

    Kommentar hinzufügen

  2. Slide the battery lock latch to the unlock position until it clicks into place.
    • Slide the battery lock latch to the unlock position until it clicks into place.

    Kommentar hinzufügen

    • Slide and hold the battery release latch in the unlock position.

    Kommentar hinzufügen

    • Slide and lift the battery out of the battery bay.

    Kommentar hinzufügen

    • Slide the NEW battery into the battery bay until it clicks into place.

    Kommentar hinzufügen

    • Slide the battery lock latch to the lock position.

    Kommentar hinzufügen

    • WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the instructions in "Before You Begin".

    • CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

    • CAUTION: Hard drives are extremely fragile. Exercise care when handling the hard drive.

    Kommentar hinzufügen

    • Remove the two screws from the computer base.

    Kommentar hinzufügen

    • Slide the hard drive to the right to disconnect it from the connector on the system board.

    Kommentar hinzufügen

    • Lift the hard drive out of the computer base.

    Kommentar hinzufügen

    • Place the NEW hard drive on the computer base.

    Kommentar hinzufügen

    • Push the hard drive towards the left to connect it to the connector on the system board.

    Kommentar hinzufügen

    • Replace the two screws to the computer base.

    Kommentar hinzufügen

Ziellinie

Terrence15

Mitglied seit 18.12.2017

69.919 Reputation

442 Anleitungen geschrieben

Team

Informative Technologies Inc. Mitglied von Informative Technologies Inc.

Community

15 Mitglieder

925 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 3

Letzte 30 Tage: 9

Insgesamt: 44