Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Store

Ersatzteile

Keine Ersatzteile angegeben.

  1. Make sure the laptop is powered down before you remove the battery.
    • Make sure the laptop is powered down before you remove the battery.

  2. Locate the battery release switch on the bottom of the laptop.
    • Locate the battery release switch on the bottom of the laptop.

  3. Slide the battery release switch away from the lock symbol towards the “unlock” position.
    • Slide the battery release switch away from the lock symbol towards the “unlock” position.

    • You can tell that the battery is unlocked once you hear a "click."

  4. Rotate the battery outward by lifting the bottom lip that pops out. Continue rotating the battery towards the top of the laptop until the battery is completely removed.
    • Rotate the battery outward by lifting the bottom lip that pops out.

    • Continue rotating the battery towards the top of the laptop until the battery is completely removed.

  5. Das Essential Toolkit

    Die nützlichsten Werkzeuge in unserem kompaktesten Kit.

    Jetzt kaufen

    Das Essential Toolkit

    Die nützlichsten Werkzeuge in unserem kompaktesten Kit.

    Jetzt kaufen
  6. Keyboard Insert a spudger next to the 5 plastic indents located at the top of the keyboard and gently pry to release the securing clips.
    • Keyboard

    • Insert a spudger next to the 5 plastic indents located at the top of the keyboard and gently pry to release the securing clips.

  7. Lift the keyboard off of the computer. *Be careful not to tear the ribbon that attaches the back of the keyboard to the computer when lifting it.* Lift the keyboard off of the computer. *Be careful not to tear the ribbon that attaches the back of the keyboard to the computer when lifting it.*
    • Lift the keyboard off of the computer. *Be careful not to tear the ribbon that attaches the back of the keyboard to the computer when lifting it.*

  8. Flip the keyboard over onto the palm-rest assembly.
    • Flip the keyboard over onto the palm-rest assembly.

  9. Flip the black securing bar near the base of the ribbon with a spudger to release the ribbon from the computer. Flip the black securing bar near the base of the ribbon with a spudger to release the ribbon from the computer.
    • Flip the black securing bar near the base of the ribbon with a spudger to release the ribbon from the computer.

  10. CD-Drive
    • CD-Drive

    • Flip the computer over, *screen down* and unscrew the 1 screw in the middle located below the battery with a J0 bit tipped screwdriver.

  11. Next using the J0 bit tipped screwdriver unscrew the 2 remaining screws shown in the picture.
    • Next using the J0 bit tipped screwdriver unscrew the 2 remaining screws shown in the picture.

  12. After all 3 screws are removed take a spudger and pry the CD-Drive out of the computer. After all 3 screws are removed take a spudger and pry the CD-Drive out of the computer.
    • After all 3 screws are removed take a spudger and pry the CD-Drive out of the computer.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein weiterer Nutzer hat diese Anleitung absolviert.

Kommentar hinzufügen

Statistik anzeigen:

Letzten 24 Stunden: 0

Letzten 7 Tage: 0

Letzten 30 Tage: 1

Insgesamt: 94