Einleitung

This guide will be utilized if you are having issues with reading disks and it is not a firmware problem.

  1. Before attempting to remove the battery ensure that the laptop is disconnected from all power sources and turned off.
    • Before attempting to remove the battery ensure that the laptop is disconnected from all power sources and turned off.

    • Turn the laptop over to its back.

  2. Slide the release latch while simultaneously pulling backwards on the battery.
    • Slide the release latch while simultaneously pulling backwards on the battery.

  3. Kostenloser Versand für alle Bestellungen über 100 $ oder mit einem Pro Tech Toolkit!

    Schau dich im Store um
  4. Slide the battery out of the battery bay.
    • Slide the battery out of the battery bay.

  5. Flip the laptop to its back side.
    • Flip the laptop to its back side.

    • Remove the screw (5mm Phillips #1) that secures the Optical Disk Drive on the back of the laptop.

  6. Push the Optical Disk Drive out using a spudger tool as shown and pull from the front cover of the Optical Disk Drive. Push the Optical Disk Drive out using a spudger tool as shown and pull from the front cover of the Optical Disk Drive. Push the Optical Disk Drive out using a spudger tool as shown and pull from the front cover of the Optical Disk Drive.
    • Push the Optical Disk Drive out using a spudger tool as shown and pull from the front cover of the Optical Disk Drive.

Abschluss

To reassemble your device, follow these instructions in reverse order.

2 weitere Nutzer haben diese Anleitung absolviert.

Nathan Lemay

Mitglied seit: 16.04.2014

2.599 Reputation

15 Anleitungen geschrieben

Team

Cal Poly, Team 9-14, Regan Spring 2014 Mitglied von Cal Poly, Team 9-14, Regan Spring 2014

CPSU-REGAN-S14S9G14

4 Mitglieder

15 Anleitungen geschrieben

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 3

Letzte 30 Tage: 8

Insgesamt: 1,577